Drop your track in. Get a visual breakdown of what's happening inside the mix. Free, instant, runs in your browser. Nothing gets uploaded.
♫
DROP YOUR TRACK HERE
or click to browse — MP3, WAV, FLAC (50MB max)
WHAT AM I LOOKING AT?
TEAL — NORMAL LEVELWaveform amplitude in a healthy range. No issues.
YELLOW — WATCH THISGetting loud. Not necessarily wrong, but worth checking your limiter.
RED — CLIPPING / HOTHitting or exceeding 0 dBFS. Audible distortion likely on some playback systems.
TEAL ACCENT — REFERENCE LINESAverage level, Spotify target, frequency curve. Use these as guides, not hard rules.
WHITE LINE — PLAYHEADYour current position in the track. Click the waveform to jump to any point.
GREEN DOT — GOODThis reading falls in a clean range for most streaming contexts.
0:00 / 0:00
L
R
NORMAL
HOT (>70%)
CLIPPING (>95%)
PLAYHEAD
MONITORSOLO ACTIVE — WAVEFORM & SPECTRUM ISOLATED
MOMENTARY—LUFS
SHORT-TERM—LUFS
01LOUDNESS
02FREQUENCY BALANCE
SCALEWEIGHTING
FLAT — raw physical energy. Low frequencies read hot by nature.
A-WEIGHTED — rolls off below 1kHz. Matches how ears hear at low monitor levels.
PINK — +3dB/octave correction. A pink-noise-balanced mix reads flat. Bars above flat = too much energy at that frequency relative to the pink noise reference most mastering engineers use.
03STEREO FIELD
PHASE SCOPE
CORRELATION METER
OUT OF PHASE (−1)MONO (+1)
04DYNAMICS
05MONO COMPATIBILITY
06CLIPPING & HEADROOM
07ORGANIC COMPLEXITY
–/ 100
–
Organic Complexity measures how much natural, human-like variation is present in the audio — spectral richness, harmonic variation, and rhythmic irregularity. Highly processed, synthesized, or loop-based audio tends to score lower. This is a signal, not a verdict.
⚡SIGNAL SUMMARY
SIGNAL GRADE
–
SUMMARY
–
These readings are approximate and meant to give you a general picture of your mix. For precision metering, try Youlean Loudness Meter (free). Built by Beats With Kev.